|
|
|
|
|
-
|
  |
|
Water Fountains |
|
|
|
- |
 |
 |
|
These heavy duty PVC spray
rings are a great way to draw attention. The circle of water
created is an impressive way to make your feature stand out.
The outer ring features brass smooth jet nozzles which are
adjustable. Jets are spaced approximately 6" apart. A center
frothy nozzle creates a thick spray of water up the middle
and can be removed and plugged if not desired. The outer
jets can be angled towards the center column, straight up or
outward. Each outer jet can be adjusted for spray
height as well - allowing you to customize each spray ring.
These bronze
nozzles are widely used in formal fountains and
architectural ponds. These high quality nozzles
cost a fraction of other similar products! Next
to the GPM under each nozzle is a column called
"head". This column represents the "feet of
head" pressure that the nozzle creates. When
sizing a pump, add up the total GPM needed from
all nozzles and then make sure the pump can
deliver the desired amount of water at that head
pressure. (Example: Running three FN1 nozzles 4'
high would be equal to 66 GPM at 20' of head
pressure)
|
|
|
|
|
SMOOTH JET NOZZLE
These individual nozzles can be used in multiples to
create spray rings, fountains
or arching jets of water. Each nozzle produces a smooth,
continuous stream of water.
|
 |
|
 |
|
- |
|
|
FROTHY NOZZLE
This popular
nozzle produces a thick, foaming geyser of water.
Creates an eye catching column of spray and is often
used in multiple nozzles, each at a different height for
a dramatic display. Due to air being mixed with water at
the nozzle, it is important that the water in the pool
stays at a constant level. Available in 1", 2" and 3"
inlet sizes.
|
 |
|
 |
|
- |
|
|
Fan Jet Nozzle
The fan jet
nozzle produces a solid fan shaped spray. Ideal when
used at a 45º angle around the perimeter of a pool or
fountain. Best used in a wind free area to maintain
spray pattern. Looks best when used in multiples.
Available in 1" inlet only.
|
 |
|
|
- |
|
|
THREE TIER NOZZLE
The most popular spray pattern we offer, the three tier
pattern is a great choice since the multiple tiers of
water provide a full, thick looking spray. Available in
3/4" and 11/2" inlet sizes.
|
 |
|
|
|
|
|
|
|
-
|
|
|
|
|
RESTRICTED PLANTS:
Some states have bans on certain pond plants. Check the
USDA Noxious Plants website
prior to purchase. The buyer needs to beware of any regulations
on plants that may be restricted. If your order gets confiscated
by your state agriculture department we cannot be held responsible.
CLIMATE VARIATIONS:
We guarantee our plants will arrive alive and healthy. Pond Plants
grow differently depending on where you live. If you took pond plants
of the same type, and planted them in different parts of the USA,
each plant would grow differently. This is Mother Nature at work.
We cannot guarantee that your climate will support long term growth
as this varies by location. With experience you will find which
pond plants thrive in your
USDA Zone. Join our
Pond, Watergarden
and Plant Forum and ask some questions before you buy
is the best advice we can give you.
SUBSTITUTIONS: We reserve
the right to substitute Out of Stock plants of equal or greater
value unless you specifically request otherwise in the remarks
section of your order you submit. We try our very best to
update the website availability and show plants that are Out of
Stock.
|
|
|
Guarantee Policy -
Privacy Policy
- Return Policy
- Safe Shopping Policy
- Shipping Policy
- USDA Zones
- FAQ's -
Master Index
Contact Us:
Info@pondkoi.com FAX: 888 867-1785
Crystal Creek Pond Supply LLC, 20699 Richardson Rd, Lake Ann, MI, 49650 |
|
|
|
|
|
